Sàn nâng kỹ thuật Hàn Quốc là gì? Trước hết nó là một loại sàn được làm bằng (thép hoặc gỗ) kích thước 600*600*33,.. được lắp đặt trên bề mặt bê tông hoặc bất kỳ bề mặt bằng phẳng nào đó bằng keo chuyên dụng hay bằng phương pháp bắt vít(ít dùng) cùng hệ thống chân đế.Nó thường được sử dụng trong các phòng datacentre,phòng máy,phòng mạng,phòng viễn thông,phòng tích hợp dữ liệu hay các văn phòng,office... Chúng tôi cung cấp sàn nâng kỹ thuật được nhập khẩu 100% từ Hàn Quốc. Sản phẩm của chúng tôi được sản xuất theo tiêu chuẩn chất lượng ISO 9001: 2000; Chứng chỉ kiểm định chất lượng xuất xưởng Test report; Chứng chỉ chứng nhận thiết bị bảo vệ tĩnh điện (Certificate of Electrostatic Protective Equipments).
Wood Core Panel
We have a various choices by using an escellent 35, 38t high density particle board(PB) with load
Feature of Product
A good workingt and that the wood flooring is designed to be noise free even when walking on it
It is easy to maintain and manage with PVC tape type
This panel of lightweight has good points to construct, use and process
Many finishing materials to choose Use of wood gives reasonable price
We have a various choices by using an escellent 35, 38t high density particle board(PB) with load
Feature of Product
A good workingt and that the wood flooring is designed to be noise free even when walking on it
It is easy to maintain and manage with PVC tape type
This panel of lightweight has good points to construct, use and process
Many finishing materials to choose Use of wood gives reasonable price
Model NO | DIEMENSION | TYPE | Weight | Concentrated Load | Finish Tile |
WKW | 600 x 600 x 35mm | R type | 9.5kg/pcs | 300kgf(2.94kn) | Conductive Tile Homogeneous Tile Hard Wood, Stone Deluxe Tile GI Sheet, AL Sheet HPL, LPM Rubber Tile, Sheet |
600 x 600 x 38mm | SP type | 11.5kg/pcs | 500kgf(4.9kn) |
Steel, Steel Concrete Panel
Due to triple structural mechanice, disperse the concentrated load in order to reinforce the distributed load, the impact load and load carrying capacity
As the epoxy powder coating, reinforces durability and prevents corrosion
Feature of Product
Due to triple structural mechanice, disperse the concentrated load in order to reinforce the distributed load, the impact load and load carrying capacity
Strongly nonflammable
As the epoxy powder coating, reinforces durability and prevents corrosion
By pouring the concrete, removes resonance and reinforces load carrying capacity
Specifications
Model NO. | DIEMENSION | TYPE | Weight | Concentrated Load | Finish Tile |
WKS | 600 x 600 x 33mm | R type | 7kg/pcs | 300kgf(2.94kn) | Conductive Tile Homogeneous Tile Deluxe Tile |
600 x 600 x 33mm | SP type | 9kg/pcs | 500kgf(4.9kn) | ||
WKSC | 600 x 600 x 33mm | R type | 13.5kg/pcs | 300kgf(2.94kn) | |
600 x 600 x 33mm | SP type | 15.5kg/pcs | 500kgf(4.9kn) |
OA PRC Panel
It has excellent load carry capacity with W.F.R.C (Wood Fiber Reinforced cement)
Feature of Product
Strong wet endurance and durability
Low heat conductivity during fire
Qualities of the W.F.R.C are excellent walking mechanism with instantaneous elasticity modulus
Construction, Processing and easy of use
Specifications
Model NO. | DIEMENSION | TYPE | Weight | Concentrated Load | Finish Tile |
WKM-OA | 500 x 500 x 25mm | R type | 11kg/pcs | 300kgf(2.94kn) | OA Tile Carpet Tile (Separate construction) |
500 x 500 x 25mm | SP type | 11.2kg/pcs | 500kgf(4.9kn) |
Quality control
Classification | Quality standard KS F 4760 | Our test standards |
Length | The tolerance of ± 0.5mm dimensions should be less than the length of each side. | ± 0.3mm or less |
Right Angel | It should not be more than 0.1% of the side length | equal or higher |
Flatness | To be less than 1.0mm at the peripheral portion. It should be 2.0mm or less in the center and other areas. | 1.0mm or less in all |
Interior pressure resistance | R-type : In the local deformation under compressive load 2,940N (300kgf) should be 4.0mm. SP type : from local deformation under compressive load 4,900N (500kgf) should be 4.0mm. | 3.5mm or less |
Impact Resistance | The cracks or cracks should not occur. | equal or higher |
Combus tibility resistance | Burning time after flame/ Burningtime after glow=0 | equal or higher |
Antistatic Property | Human vs. voltage shall be Vp < 3000 V. | equal or higher |
Leakage Resistance | The resistance value must be 1x 105Ω | equal or higher |
Anti-corrosion Property | Rating adhesion of the coating should be at least 4B. There shall be no modification or lifting of the paint surface due to the salt spray test. | equal or higher |
Mọi thông tin chi tiết hơn về sản phẩm vui lòng liên hệ Mr Hà. 0912 83 1616
Đăng nhận xét